Freeze prevention device with near-infrared radiation
- Less Operation
- Preventing frosting and freezing to the wall and ceiling will reduce the chronic work of defrosting and floor cleaning.
- Preserving safety and secure environment in the refrigerating warehouse
- Preventing personal slipping injury and lift-sliding accidents
- Low cost and easy installation
- The old type heater was installed under the floor permanent, so it was high cost and time consuming to completion of the construction.
IR Defroster is as easy installation as just an interior lighting equipment, low cost. Easy installation work will be No need to stop operation.
Example of use
Before
After（Lightning after defrosting）
Adverse effects of frosting and freezing floors
| Defrosting and floor cleaning required |
Need operator and time |
| Increased load on cooling equipment due to frosting |
Degrading the Equipment and cooling efficiency |
| Falling accidents due to frozen floors |
Inadequate accident prevention, treated as industrial accidents |
| Lift-sliding accidents |
Damaged cargo, personal injury |
Resolving the problem of frost and floor freezing
- IR Defroster installed on the wall or ceiling facing to the floor, it keeps the refrigerating warehouse drying and preventing from freezing and frost formation efficiently.
- ・Resolving operator's frost removing labor time
- Preventing from freezing and frost formation will minimize daily defrosting work in the refrigerating warehouse.
- ・Reducing running cost of cooling equipment
- Reducing frost formation to the cooling equipment itself will improve cooling performance.
- ・Preserving the safety and secure environment in the refrigerating warehouse
- Preventing personal slipping injury and lift-sliding accidents
- ・Reducing maintenance cost
- Reducing the maintenance and repairing cost due to damage of the heat isolation door by lift-sliding accident and damage of floor crack by icing on the floor.
- ・Low cost and easy installation
- IR Defroster has compact design and weight only 2.0kg. Comparing to the ordinal embedded floor heater, IR Defroster is less cost and quicker installation, easy maintenance, and easy to remove to relocate.
Additional Information
How IR Defroster works?
The IR Defroster does not heat the air to melt ice and frost.
It acts directly on water molecules, causing them to vibrate, evaporating, and drying them out.
（See Figure 1）
■See Figure 1
The near-infrared radiations emitted by the IR defroster is suitable for drying moisture. (See figure 2)
When the near-infrared radiation reached the objects such as ice, frost and condensation water, it acts directly
on water molecules, causing them to vibrate and generating friction heat. The friction heat will melt the lump
and evaporate and dry out condensation water.
■See figure 2
Effects on the human body
The near-infrared radiations emitted by the IR defroster have a longer wavelength than the visible light wavelength of 0.74mμ emitted by the sun and are harmless to the human body.
In fact, near-infrared rays have been used in saunas, room hearting and medical equipment.
It is harmless to the human body.
Specification・Dimension
| Voltage |
200V |
100V |
| Model |
SRNK1500(Standard) |
SRNK2000 |
SRNK600 |
SRNK1000L |
SRNK500L |
| Wattage |
1500W |
2000W |
600W |
1000W |
500W |
| Lamp |
1500W 7.5A |
2000W 10A |
600W 3A |
1000W 10A |
500W 5A |
| Size |
405(L) x 100(W) x 145(H) mm |
| Weight |
Approx. 2kg |
| Effective Area |
4ｍ |
6ｍ |
3ｍ |
3ｍ |
3ｍ |
※Non-standard items are special order items.
Contact
Drawing
Catalogue
